Filter
Top Products
Menu operations
EN
25
To play back camera images on a TV, set the video output according to your TV’s video
signal type.
• TV video signal types differ by country/region. Check the video signal type before
connecting the camera to the TV.
NTSC: North America, Taiwan, Korea, Japan
PAL: European countries, China
Playing back pictures on a TV
Turn off the camera and the TV before connecting.
VIDEO OUT ...............................................................................Playing back pictures on a TV
NTSC /PAL
The factory default settings differ according to the region where
the camera is sold.
POWER SAVE...................................................Setting the camera to the power save mode
OFF /ON
When no operation has been performed for approximately 10
seconds while in shooting mode, the monitor automatically shuts
off. Pressing the zoom lever or other buttons restores the
camera from power save mode.
Settings on the TV
Turn the TV on, and set it to video input mode.
• For details of switching to video input, refer
to your TV’s instruction manual.
• Images and the information displayed on the
screen may be cropped depending on the
TV’s settings.
Settings on the camera
Turn the camera on and press q to select
the playback mode.
• The last picture taken is displayed on the
TV. Use the arrow pad to select the
picture you want to display.
Connect to the TV’s video
input (yellow) and audio input
(white) terminals.
AV cable (provided)
A/V OUT jack
Connector cover
d4352_e_0000_7.book Page 25 Friday, July 6, 2007 10:32 AM