Olympus C-4040ZOOM Digital Camera User Manual


 
9
Monitor indications — Shooting information
The indications vary depending on the shooting mode.
If you shoot using the monitor for a long time, noise may appear on pictures.
The information below is displayed
for about 3 seconds after operating
the buttons/mode dial or closing the
menus.
The information below is always
displayed in the shooting mode.
*The illustrations show examples of
indications displayed when the mode
dial is set to P.
1 Shooting mode
Displays the shooting mode.
P: Program mode, A: Aperture priority mode, S: Shutter priority mode,
M: Manual mode, : Movie mode
2 Aperture value
Displays the current aperture value.
3 Shutter speed
Displays the current shutter speed.
4 Exposure compensation
Displays the current exposure (brightness) compensation value.
Exposure differential (M mode only)
Displays the difference between the exposure determined by the
currently selected aperture and shutter speed compared to the
exposure level considered optimal by the camera.
5 AF target mark
Place this on the subject.
AEL
SLOW1
2272x1704
AEL
1 C-4040ZBasic-E2 01.7.11 7:32 PM Page 9