Filter
Top Products
En 35
En
J ERASING PICTURES
This function enables you to erase recorded pictures. You can choose the
single-frame erase or the all-frame erase.
• You cannot erase pictures that are protected. Cancel the protection
before erasing such pictures.
• Once erased, pictures cannot be restored. Be careful not to
accidentally erase pictures you want to keep.
Single-frame erase
This function erases only the picture displayed on the monitor. The all-frame
erase function can be used to erase all the pictures on the card at once.
1 Press with the lens barrier closed.
• The monitor turns on.
2 Use the arrow pad to display the picture you want to
erase.
3 Press .
• The top menu is displayed.
4 Press to select ERASE.
5 Press to select YES, and press .
• The picture is erased and the menu is closed.
All-frame erase
1 In the playback mode top menu, select MODE MENU →
CARD → CARD SETUP, and press .
2 Press to select ALL ERASE, and press .
3 Press to select YES, and press .
• All the pictures are erased.
Note
x215_Basic.book 35 ページ ２００３年１１月２６日 水曜日 午後２時４７分