Filter
Top Products
13
Button operations
1
Press the NY button repeatedly in shooting mode. Press F to set.
• The self-timer lamp lights for approximately 10 seconds, blinks for
approximately 2 seconds, and then the picture is taken.
• Press the NY button to cancel the self-timer.
• Self-timer shooting is automatically canceled after one shot.
Press Y# button repeatedly in shooting mode to select the flash mode.
Press F to set.
In playback mode, select the picture you want to erase, and press the S button.
• Once erased, pictures cannot be restored. Check each picture before erasing
to avoid accidentally erasing pictures you want to keep.
g“0 Protecting pictures” (P.22)
In playback mode, select the picture you want to print, and press the < button.
g“Direct printing (PictBridge)” (P.33)
b NY button Self-timer shooting
Y ON After setting this function, press the shutter button fully.
Y OFF Cancels self-timer function.
c Y# button Flash shooting
AUTO (Auto-flash) The flash fires automatically in low light or backlight
conditions.
! Red-eye reduction flash This emits pre-flashes for red-eye reduction.
# Fill-in flash The flash fires regardless of the available light.
$ Flash off The flash does not fire even in low light conditions.
d S button Erasing pictures
e < button Printing