Filter
Top Products
30
Menu operations
2
The pixel mapping function allows the camera to check and adjust the CCD and
image processing functions. It is not necessary to operate this function
frequently. Approximately once a year is recommended. Wait at least one minute
after taking or viewing pictures to allow the pixel mapping function to perform
properly. If you turn the camera off during pixel mapping, start again.
Select [PIXEL MAPPING]. When [START] is displayed, press F.
The date and time is saved with each image, and is used in the file name.
• The first two digits of the year are fixed.
• The time is displayed in the 24-hour format.
• For more accurate setting, press F when the time signal hits 00 seconds.
4 COLOR Setting the color of the menu screens
NORMAL /GREEN / PINK
5 PIXEL MAPPING Adjusting the image processing function
6 s Adjusting the monitor brightness
BRIGHT / NORMAL
7 X Setting the date and time
x
OK
SET
MOVE
Y M D
X
2006 . 01 . 01
2006 . 01 . 01
00 : 00
00 : 00
O/N
:
Sets the date and time.
X/Y
:
Moves to the previous or next setting.
O/N : Selects the date format (Y-M-D, M-D-Y, D-M-Y).