Filter
Top Products
Menu operations
EN
29
The factory default settings differ according to the region where the camera
is sold.
To play back camera images on a TV, set the video output according to your TV’s
video signal type.
• TV video signal types differ by country/region. Check the video signal type
before connecting the camera to the TV.
NTSC: North America, Taiwan, Korea, Japan
PAL: European countries, China
Playing back pictures on a TV
Turn off the camera and the TV before connecting.
VIDEO OUT........................................................... Playing back pictures on a TV
NTSC /PAL
POWER SAVE............. Setting the camera to the power save mode
YES If there is no operation for 3 minutes, the camera automatically goes
into sleep mode. If there is no operation for 15 minutes thereafter, the
camera automatically turns off.
NO The camera is not set to the power save mode.
Settings on the TV
Turn the TV on, and set it to video
input mode.
• For details of switching to video
input, refer to your TV’s instruction
manual.
Settings on the camera
Turn the camera on and press q to
select the playback mode.
• The last picture taken is displayed
on the TV. Use the arrow pad to
select the picture you want to
display.
Connect to the TV’s video
input (yellow) and audio
input (white) terminals.
AV cable (provided)
Multi-connector
Connector cover