Olympus FE-4030 Camcorder User Manual


 
47
EN
Using a separately sold AC
adapter
A D-7AC AC adapter (sold separately) is useful
for time-consuming tasks such as downloading
images to a computer or when running a
slideshow for a long period of time. A CB-MA1/
CB-MA3 multi-adapter (sold separately) is
required when using a D-7AC AC adapter with
this camera. To charge the battery, turn the
camera off and connect the D-7AC AC adapter.
Use only AC adapters approved for use with this
camera.
Using a separately sold
charger
A charger (LI-41C/LI-40C: sold separately) can
be used to charge the battery. In this case,
remove the battery from the camera.
Using your charger and AC
adapter abroad
The charger and AC adapter can be used in
most home electrical sources within the range
of 100 V to 240 V AC (50/60Hz) around the
world. However, depending on the country
or area you are in, the AC wall outlet may be
shaped differently and the charger and AC
adapter may require a plug adapter to match
the wall outlet. For details, ask at your local
electrical shop or travel agent.
Do not use travel voltage converters as they
could damage your charger and AC adapter.
Using an SD/SDHC memory
card
A card (and internal memory) also corresponds
to the lm that records images in a lm camera.
Otherwise, the recorded images (data) can be
erased, and retouching is also available with
the use of a computer. Cards can be removed
from the camera and exchanged, but this is
not possible with the internal memory. Use of
larger capacity cards enables you to take more
pictures.
SD/SDHC card write-protect switch
The SD/SDHC card body has a write-protect
switch. If you set the switch to the “LOCK”
side, you will not be able to write to the card,
delete data or format. Release the switch to
enable writing.
LOCK
Cards compatible with this camera
SD/SDHC memory cards (for more
information, visit the Olympus website)