Filter
Top Products
7
6 Number of storable still pictures
●Displays the number of still pictures you can shoot.
Seconds remaining ( mode only)
●Displays available movie recording time (press Shutter button all the way to record).
Note:
●When there is insufficient space remaining, the camera beeps and CARD FULL
appears. If this happens, replace the card with a new/storable card or erase
unwanted pictures in the existing card to make space.
●The number of storable pictures may not be reduced every time a picture is taken, or
increased when a picture is erased. The amount of data varies depending on the
subject.
7 Record mode TIFF/SHQ/HQ/SQ
●Displays the record mode selected on the Menu.
8 Memory gauge
●Displays the number of pictures stored in the built-in memory.
●When using rechargeable NiMH or NiCd batteries, charge them before installing.
●Be aware that the time when the battery check indication appears varies
depending on the type of batteries used.
●After taking a picture or when turning on the power with batteries that are running
low, the camera may emit several short beeps and the number of storable
pictures will blink. If this happens, the picture just taken will not turn out properly.
Replace the batteries and take the picture again.
9 Battery check
●If the remaining battery power is low, the battery check indication appears. It also
appears even when INFO is set to OFF. The indication changes as follows:
Lights.
Remaining power
level: high
Blinks.
Remaining power level:
low. Replace with a new
battery.
Remaining power level:
exhausted. BATTERY
EMPTY is displayed.
Replace with a new battery.