Olympus FL-50 Camera Flash User Manual


 
Thank you for purchasing the OLYMPUS Electronic Flash (FL-50). Before use, please read this instruction manual to ensure
your safety, and keep it handy for future reference.
DANGER
Failure to observe the
precautions indicated by this
symbol may result in serious
injury or death.
WARNING
Failure to observe the
precautions indicated by this
symbol may result in injury
or death.
CAUTION
Failure to observe the
precautions indicated by this
symbol may result in injury or
property damage.
Symbols for prohibiting action Symbol instructing action
Prohibited
Disassembly
prohibited
Mandatory
SAFETY PRECAUTIONS (Be sure to read and observe the following.)
This instruction manual uses a variety of common symbols and icons to assist you in proper handling and usage of this
product properly, and to warn you of potential hazards to yourself and others as well as to property. These symbols and their
significance are described below.
This electronic flash has been designed exclusively for use with Olympus digital cameras. Do not connect the electronic
flash to a camera not manufactured by Olympus, as this may result in a malfunction or damage to the camera and/or
flash.
DANGER
The electronic flash incorporates high-voltage circuitry. Never attempt to disassemble or modify it, as this may
result in electric shock and/or injury.
Do not use the electronic flash in a place where it may be exposed to flammable or explosive gas. Otherwise,
fire ignition or explosion may result.
To prevent a traffic accident, do not direct the flash towards the driver of a car.
WARNING
Do not fire the flash or AF illuminator light immediately in front of a person’s eyes (particularly an infant).
Exposure to the light from the flash at a very short range may cause irreparable injury to the eyes. Be espe-
cially careful to avoid using the electronic flash at a distance of less than 1 meter from an infant.
Do not leave the electronic flash and batteries within reach of children.
• If a child swallows a battery or small accessory, see a doctor immediately.
• If the flash is emitted near a child, their eyes may be injured irreparably.
•Moving parts of the electronic flash could injure a child.
Avoid the following actions to prevent fire or injury due to battery fluid leak, overheating, fire ignition or bursting.
• Do not use batteries that are not specified for use with this electronic flash.
• Do not throw the battery in a fire, expose it to heat, short-circuit it, or disassemble it.
• Do not mix old and new batteries, or batteries of different types or brands.
• Do not attempt to recharge non-rechargeable batteries such as alkaline batteries.
• Do not load batteries with the +/– polarity reversed.
Do not store the electronic flash in a place exposed to excessive dust or moisture. Otherwise, fire or electric
shock may result.
Do not use the flash when it is covered by a flammable object such as a handkerchief.
Do not touch the light-emitting area after use. It will be very hot and could burn you.
CAUTION
If you notice any abnormalities such as leakage, discoloration, deformation, overheating, or odor, stop using this
device. Continued use could result in fire, overheating or explosion. Remove the batteries carefully to avoid burn-
ing yourself and to prevent exposure to gas or dangerous fluids that may be released. For repair, contact Olympus.
Always remove the batteries when you don’t expect to use the electronic flash for a long period. Otherwise,
heat generation or fluid leak from the batteries may result in fire, injury and/or contamination of the surroundings.
Do not use a leaking battery. Doing so could result in fire or electric shock. Please contact your dealer or
Olympus.
Do not handle the electronic flash with wet hands. Doing so could result in electric shock.
Do not leave the electronic flash in a place where it may be exposed to high temperatures. Otherwise, deterio-
ration of parts or fire may result.
Do not take out the batteries immediately after using the electronic flash continuously for a long period.
Otherwise, the hot batteries may cause burns.
Do not deform the battery compartment or allow any foreign objects to get inside.
HANDLING PRECAUTIONS
The electronic flash is composed of precision electronic parts. Absolutely avoid using or storing the electronic
flash in the following places, as this may result in malfunction or failure.
• Under direct sunlight, on a beach, etc.
•Anywhere exposed to high temperatures and humidity or rapid fluctuations in temperature and humidity.
•Any place exposed to excessive sand, dust or dirt.
Near a fire.
Near an air conditioner or air humidifier.
•Any place exposed to water or moisture.
•Any place subject to vibrations.
• Inside an automobile.
Do not apply a strong vibration or shock to the electronic flash by dropping it or hitting it against something.
When the electronic flash has not been used for a long period, mold or moss may form. This can cause a
malfunction. To prevent this, it is recommended to check the operations before using the electronic flash
after a long period of storage.
Do not touch the electric contacts of the electronic flash to prevent malfunction.
To prevent overheating and deterioration of the light-emitting section, do not continue full activation more than 10
times in a row. After 10 successive operations, stop firing for a while until the light-emitting section cools down.
BATTERY PRECAUTIONS
Use only the specified batteries.
• AA (R6) alkaline dry cell batteries (LR6 type) .................... x 4
• AA (R6) Ni-Cd batteries ..................................................... x 4
• AA (R6) Ni-Mh batteries ..................................................... x 4
•AA (R6) Ni-Mn batteries (ZR6 type) ................................... x 4
• AA (R6) lithium batteries (FR6 type) .................................. x 4
• Lithium battery packs (CR-V3 type) (Olympus LB-01) ....... x 2
• AA (R6) manganese batteries cannot be used.
Be sure to observe the following points. Otherwise, battery fluid leak, overheating, fire ignition and/or bursting
may result.
Do not mix old and new batteries, recharged and discharged batteries, batteries of different capacities, or
batteries of different types or brands.
• Do not attempt to recharge non-rechargeable batteries such as alkaline batteries.
• Do not load or use the batteries with the +/– polarity reversed. If the batteries do not fit smoothly in the battery
compartment, do not force them.
•Never use a battery if its outer coating (insulation) has been partially or entirely peeled off. Otherwise, leak-
age, overheating or explosion may result.
Some brand-new batteries may also have their outer coating (insulation) peeled off completely or partially.
Never use these batteries.
For customers in Europe
The “CE” mark indicates that this product complies with the European requirements for safety, health, environ-
ment and customer protection. CE-mark products are for sale in Europe.
For customers in USA
FCC Notice
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:(1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
Any unauthorized changes or modifications to this equipment would void the user’s authority to operate.
For customers in CANADA
This Class B digital apparatus complies with Canadian ICES-003.
If the electronic flash is dropped in water or any fluid gets inside, immediately remove the batteries and contact
your dealer or Olympus. Continued use could result in fire or electric shock.