Filter
Top Products
E-33
• Do not use anticorrosion agents on the metal parts. The metal parts
are made of aluminum, brass or stainless steel. Cleaning with pure
water is sufficient.
• Do not use commercial defogging agents. Always use the original
Olympus defogging silica gel.
• Do not use adhesive for repairs or other purposes. When repair is
required, please contact a service station of our company or your dealer.
Q11: Please tell me about repairs.
A11: Please contact a service station of our company or your dealer, if
repair should be necessary. Do not try to repair, disassemble or modify
the Case yourself. Repair, disassembly or modification by you or third
parties not authorized by Olympus invalidates the guarantee.
Q12: What are the model numbers of the PT-015 accessories?
A12: The following accessories are being sold.
(
1
)
O-ring for the PT-015 body (POL-015): This is a silicone rubber O-ring
packing to be installed in the PT-015 body to make it waterproof. O-rings for
other Case models cannot be used.
(
2
)
Silicone O-ring grease (PSOLG-1): This is a special grease for silicone
O-ring maintenance.
(
3
)
Silica gel (SILCA-5): This is a desiccant used to prevent fogging of the
glass parts of the Case. The quantity is five bags.
(
4
)
LCD hood (PFUD-04): This hood is installed on the LCD monitor
window of the Case to make it easier to see the LCD monitor of the
camera.
(
5
)
Balance weight for PT-015 (PWT-015): This is a weight intended to
bring the Case close to neutral buoyancy in sea water. Under
consideration of the environment, no lead is used.
❈ You can order in large computer shops and camera mass sale stores.
❈ Please contact your dealer or a service station of our company when
replacement is required. Replacement will be made against payment.