Filter
Top Products
10
EN
Preparing the Camera
3
STYLUS-9010/μ-9010
STYLUS-7040/μ-7040
STYLUS-5010/μ-5010
1
2
1
2
STYLUS-9010/-9010, STYLUS-7040/
-7040: Insert the battery by putting in the
marked side fi rst, with the B marks
toward the battery lock knob.
STYLUS-5010/-5010: Insert the battery by
putting in the marked side fi rst, with the
C marks toward the battery lock knob.
Damage to the battery exterior (scratches,
etc.) may produce heat or an explosion.
Insert the battery while sliding the battery
lock knob in the direction of the arrow.
Slide the battery lock knob in the direction
of the arrow to unlock, and then remove the
battery.
Turn off the camera before opening the
battery/card compartment cover.
When using the camera, be sure to close
the battery/card compartment cover.
Battery charge and camera
setup
Connect the camera to the computer to charge
the battery and setup the camera.
System requirements
Windows XP (SP2 or later)/
Windows Vista/Windows 7
When using another system other
than the above or no computer,
see “Charging the battery with the
included USB-AC adapter.” (p. 12)
Inserting the battery
1
STYLUS-9010/μ-9010
STYLUS-7040/μ-7040
STYLUS-5010/μ-5010
2
1
Battery/card
compartment lock
Battery/card
compartment cover
2
1
Battery/card
compartment cover
2
STYLUS-9010/μ-9010 STYLUS-7040/μ-7040
STYLUS-5010/μ-5010
Battery lock knob
Battery lock knob
STYLUS-7040/
-7040
STYLUS-5010/-5010