Filter
Top Products
29
EN
1
Select the ISO setting option in the
shooting function menu.
PP
0.00.0
AUTO
WB
AUTO
WB
200
ISO
200
ISO
100
ISOISO
100
1/400 F3.21/400 F3.2
400
ISO
400
ISO
ISO 200ISO 200
2
Use HI to select the setting
option, and press the A button to
set.
Option Description
ISO AUTO
The camera automatically adjusts
the sensitivity according to the
shooting scene.
HIGH ISO AUTO
The camera uses a higher
sensitivity compared to
[ISO AUTO] to minimize blur
caused by a moving subject or by
camera shake.
Value
The ISO sensitivity is fi xed to the
selected value.
Sequential shooting (Drive)
Pictures are taken sequentially while the shutter
button is held down.
1
Select the drive option in the
shooting function menu.
0.00.0
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
PP
SEQUENTIALSEQUENTIAL
Option Description
o
One frame is shot each time the
shutter button is pressed.
j
*1
Take sequential shots using the
focus, brightness (exposure) and
white balance set in the fi rst frame.
c
The camera takes sequential shots
at a faster speed than in [j].
d
The camera takes sequential shots
at approximately 10 frames/sec
*2
.
*1
The shooting speed varies depending on the
settings for [IMAGE SIZE/COMPRESSION] (p. 30).
*2
STYLUS-7040/μ-7040
approximately 14 frames/
sec.
STYLUS-5010/μ-5010
approximately 10 frames/
sec.
When set to [j], the fl ash (p.26) cannot
be set to [REDEYE]. In addition, when
set to [c] or [d], the fl ash is fi xed to
[FLASH OFF].
When set to [c] or [d], [IMAGE SIZE]
is limited to [3] or lower, and the ISO
sensitivity is fi xed to [ISO AUTO].