Oregon ATCmini Film Camera User Manual


 
ATCMini – 15
EN
Mounting - Other Mounting Options
The camera can be mounted on hardshell helmet, surfboard or handlebar of bicycle or motorcycle
with designated mounts.
Other cameras from the ATC series can also utilise those mounts through conversion set. The
camera grip of the ATC conversion set can be used for ATC3K & ATC9K. ATC5K users can make
use of the existing ATC5K grip along with the ATC conversion set’s quick release to work with our
new mounting series.
Mounting instructions can be found in the “Advanced Mounting”.
Optional mounts and conversion set are sold separately.
Mountings warnings
Make sure the mounting is secure before embark.
Do not modify the mounting object structurally to mount the camera.
Clean the mounting surface before applying the adhesives.
Apply the adhesives at room temperature (18°C ~ 38°C).
Leave the mount unloaded for 72 hours to strengthen the bond.
Do not use abrasive powders or solvents, such as benzene or thinner to clean the product.
en.indd 15 8/9/2011 1:17:13