Filter
Top Products
Seesaw controller
Joystick controller can be changed
for seesaw controller.
(Standard accessory)
AW-RP555
AW-RP655
• Controls up to five cameras and five pan-tilt heads.
• Full camera control by camera menu
• Speed of controls can be adjusted by the angle of the operation lever.
• 10 pre-set memories per camera
• Maximum control distance from pan-tilt head to controller:
1 000 m (3 280 ft.) (AW-PH360,AW-PH650)
• With a protocol converter (AW-IF400), this controller can control the AW-PH400.
• The motion direction of the operation lever can be reversed or changed.
• This controller can be placed on a desk or mounted in a rack.
(The position of input and output connectors can be changed by 90 degrees)
• Power Supply AW-PS505A is required.
AW-RP400
• Changeable zoom/focus controller (joystick/seesaw)
• Joystick with camera roll control
• 50 preset positions
• 5 pan-tilt heads control
• Zoom/Focus/Pan/Tilt speed control
• Tally/Intercom function
• 10 minutes tracing memory (60 seconds x 10 positions)*
• RS232C interface
• Maximum control distance:500 m (1 640 ft.)**
• Cross control by two controllers
• Camera control inputs (AW-CB400)
• +DC12 V operation (Power Supply AW-PS505A is required.)
*
This function does not work for AW-PH405/PH650.
**
Maximum 1 000 m (3 280 ft.) by using the Protocol Converter AW-IF400.
Availability of the tracing
memory function
*
When you use it with AW-IF400,
activating the extended distance
transmission function is required.
*
• Controls maximum five cameras and five pan-tilt heads without hub unit.
• Full camera control by LCD menu
• Control speed can be adjusted by the angle of the operation lever and
high speed and low speed mode can be switched.
• 50 pre-set memories per camera
• Ergonomically designed joystick controller
• 10 tracing memories (Maximum time: 300 sec)
• Maximum control distance from controller to pan-tilt head: 1 000 m (3 280 ft.)
(AW-PH360,AW-PH650) This controller can control an AW-PH400 by using a
protocol converter (AW-IF400).
• The motion direction of the operation lever can be reversed.
• Two additional controllers can be connected.
• This controller can be placed on a desk or mounted in a rack.
• Power Supply AW-PS505A is required.
Compact Size Controller
Multi-function Controller
Pan-tilt Controller
Pan-tilt systems for multiple cameras ready
for a wide range of applications.
Control Panels
High performance multi-function controller with
full camera control function
Compact controller with
full camera control function
High performance controller for
professional and broadcast use
Power supply
Power consumption
Weight
Dimensions(W x H x D)
Accessories
DC12 V
Approx. 13 W
Approx. 3.8 kg (8.4 lbs)
320 mm x 85 mm x 266 mm (12-5/8 " x 3-3/8 " x 10-1/2 ")
Zoom switch x 1, Plug (D-SUB 15pin) for tally/INCOM system x 1 set,
Rack-mounting adapters x 2, Mounting screws (M4 x 8 mm) x 4
AW-RP655
AW-RP555
AW-RP400
•
-
•
•
-
-
•
-
•
•
-
-
AW-PH400 AW-PH405 AW-PH360 AW-PH650
Power supply
Power consumption
Dimensions(W x H x D)
Weight
Accessories
DC12 V
Approx. 9.0 W
210 mm x 58 mm x 177 mm (8-1/4 " x 2-5/16 " x 7 ")
1.4 kg (3.08 lbs)
Rack mounting adapters (5U) x 2 Mounting screws (M4 x 8 mm) x 4
Power supply
Power consumption
Dimensions(W x H x D)
Weight
Accessories
DC12 V
Approx. 9.0 W
420 mm x 52 mm x 220 mm (16-1/2 " x 2-1/16 " x 8-11/16 ")
Approx. 3.5 kg (7.7 lbs)
Rack mounting adapters (5U) x 2 Mounting screws (M4 x 8 mm) x 4
(Rear view)
(Rear view)
(Rear view)
5