Compact Live Switcher
AW-SW350
• Five inputs (composite and Y/C) in compact body (half rack size)
• Three program outputs and one preview output
• Selectable bus switching system
• 10 bit, 5-channel frame synchronizer/genlock system are switchable
• Frame capture, soft wipe and linear key
• +DC12 V operation
• Tally and intercom function
• Power Supply AW-PS505A is required.
Power supply
Power consumption
Dimensions(W x H x D)
Weight
Accessories
DC12 V
Approx. 16 W
210 mm x 86 mm x 176 mm (8-1/4 " x 3-3/8 " x 6-15/16 ")
Approx. 2.2 kg (4.8 lbs)
Tally/Intercom connector x 5, Rack mounting clamp x 2,
Connection bracket, Screw kit, Image transfer setup CD
AW-RC400
• Five channels compensation
• Composite, Y/C, Y/Pb/Pr, R/G/B (Composite, Y/C, Y/Pb/Pr, R/G/B video
signals can be compensated by maximum 500 m (1 640 ft.))
• +DC12 V operation (Power Supply AW-PS505A is required.)
Power supply
Power consumption
Weight
Dimensions(W x H x D)
Accessories
DC12 V
Approx. 9 W
Approx. 3.7 kg (8.2 lbs)
420 mm x 88 mm x 250 mm (16-1/2 " x 3-7/16 " x 9-13/16 ")
Rack-mount angles x 2, Mounting screws (M4 x 8 mm) x 4
AW-RC600
• Composite, Y/C and component (Y/Pb/Pr, R/G/B) outputs
• By using RCU cable (AW-CA50A26) and extension cables (WV-CA26T26,
WV-CA26U/15/30/100), this unit can control a camera at a maximum distance
of approx. 100 m (328 ft.) (with viewfinder AW-VF64)
• Camera power can be supplied by this RCU.
• Equipped with tally/intercom, AUX (for line view) inputs, and contact-closure
type pan-tilt head control input terminal (15-pin D-sub)
Power supply
Power consumption
Dimensions(W x H x D)
Weight
Accessory
AC120 V/AC220 V to 240 V*
Approx. 67 W
420 mm x 88 mm x 250 mm (16-1/2 " x 3-7/16 " x 9-13/16 ")
Approx. 5.6 kg (13.2 lbs)
Power cable x 2, Rack angle handles x 2, Rack-mount angles x 2,
Rack angle handle fixing screws x 4, Mounting screws x 4
Camera Controller/Switcher
Remote Control Unit (RCU)
Cable Compensation Unit
Compact Live Switcher
Basic camera controls on the front panel and
full camera control by camera menu
Remote control panel enabling full control of
up to five cameras
High quality five input live switcher for multi use
AW-CB400
• Controls five cameras
• Full camera control
• +DC12 V operation*
• Tally/Intercom function**
*
Power is supplied from AW-RP400.
Power supply AW-PS505A is required for controlling cameras directly
(Maximum control distance: 1 000m (3 280 ft.)
**
Intercom function is not available if the AW-CB400 is connected directly to the camera.
Power supply
Power consumption
Weight
Dimensions(W x H x D)
Accessories
DC12 V
Approx. 3.8 W
Approx. 1.4 kg (3.08 lbs)
100 mm x 85 mm x 266 mm (4" x 3-3/8" x 10-7/16")
Pan-tilt controller connection cable (10 m (32.8 ft.))
Remote Operation Panel
(Rear view)
(Rear view)
(Rear view)
(Rear view)
*
The values vary depending on the region.
6