Filter
Top Products
8
Changing backlight brightness
The brightness of the LCD monitor backlight can
be adjusted between ve different settings.
1
Select [LCD BL] in the [LCD] item on the
setup menu [SW MODE] screen.
[LCD BL] is assigned to the <LCD> button.
2
Press the <LCD> button.
Each time the button is pressed, the backlight
brightness changes in the following order:
0 (normal)
-1 (somewhat dark)
-2
-3
(dark)
+1 (bright)
0 (normal).
• The setting will be saved even if the power is
switched off.
• It can also be switched with the [LCD
BACKLIGHT] item on the setup menu
[DISPLAY SETUP] screen. (Page 95)
Flipping images up, down, left and right
By ipping the images displayed on the LCD
monitor up, down, left and right, the angle of view
and imagery of images can be checked.
Even when the displayed image is ipped, the
recorded image is not ipped.
1
Select [LCD REV] in the [LCD] item on the
setup menu [SW MODE] screen.
[LCD REV] is assigned to the <LCD> button.
2
Press the <LCD> button.
Pressing the button switches between normal
display and flipped display.
• If the power of the camera is switched off, it will
appear in normal display when next switched
on.
• Screen displays other than images are also
ipped. When screen display is not needed,
press the <DISP/MODE CHK> button to turn
off some displays.
• During ipped display, images in REC CHECK
and playback images in <PB> mode are also
ipped.
• Images on the viewnder are not ipped.