Filter
Top Products
20
SQT0323
1 Connect the AC cable to the battery charger and the AC outlet.
(AG-AC90AP/PJ only)
≥ Use the AC cable (K2CA2CA00025; supplied) dedicated for the battery charger.
2 Insert the battery into the battery charger by aligning the arrows.
≥ We recommend using Panasonic batteries (l 13, 19, 21).
≥ If you use other batteries, we cannot guarantee the quality of this product.
≥ Do not heat or expose to flame.
≥ Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with
doors and windows closed.
Inserting/removing the battery
Install the battery by inserting it in the direction shown in the figure.
Removing the battery
Make sure that the power switch is set to OFF
and the status indicator is turned off, and then
remove by holding onto it taking care not to
drop. (l 24)
While pressing the battery release button,
remove the battery.
Insert the battery until it clicks and locks.
AG-AC90A-SQT0323_mst.book 20 ページ ２０１４年５月１５日 木曜日 午後２時６分