Filter
Top Products
22
SQT0323
Connecting to the AC outlet
The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always
“live” as long as the AC adaptor is connected to an electrical outlet.
Important:
≥ Use the supplied AC adaptor. Do not use the AC adaptor of another device.
≥ Do not use the AC cable with any other equipment as it is designed only for this unit. Also,
do not use the AC cable from other equipment with this unit.
(AG-AC90AP/PJ)
A AC cable (K2CB2CB00022; supplied)
(AG-AC90APX)
B AC cable (K2CA2YY00129; supplied)
≥ Insert the plugs as far as they will go.
1 Connect the AC cable to the AC adaptor and the AC outlet.
(AG-AC90AP/PJ only)
≥ Use the AC cable (K2CB2CB00022; supplied) dedicated for the AC adaptor.
2 Connect the AC adaptor to the DC input terminal [DC IN].
∫ Removing the AC adaptor
≥ Make sure to set the power switch to OFF and the status indicator is turned off when
disconnecting the AC adaptor.
AG-AC90A-SQT0323_mst.book 22 ページ ２０１４年５月１５日 木曜日 午後２時６分