Panasonic AG-AC90APX Camcorder User Manual


 
19
SQT0323
About batteries that you can use with this unit
The battery that can be used with this unit is CGA-D54.
Charging the battery
Important:
Do not use the AC cable with any other equipment as it is designed only for this unit. Also,
do not use the AC cable from other equipment with this unit.
It is recommended to charge the battery in a temperature between 10 oC and 30 oC (50 °F to
86 °F).
(The battery temperature should also be the same.)
C AG-AC90AP/PJ: AC cable (K2CA2CA00025; supplied)
AG-AC90APX: AC cable (K2CA2YY00129; supplied)
Insert the plugs as far as they will go.
Preparation
Power supply
It has been found that counterfeit battery packs which look very similar to the genuine
product are made available to purchase in some markets. Some of these battery packs
are not adequately protected with internal protection to meet the requirements of
appropriate safety standards. There is a possibility that these battery packs may lead to
fire or explosion. Please be advised that we are not liable for any accident or failure
occurring as a result of use of a counterfeit battery pack. To ensure that safe products are
used we would recommend that a genuine Panasonic battery pack is used.
When this unit is purchased, the battery is not charged. Charge the battery fully before
using this unit for the first time.
Charging lamp [CHARGE] A
Lights up:
Charging (Battery charging time: l 21)
Goes off:
Charging completed
Flashing:
Be sure to connect the unit correctly
Power lamp B
This will light up when the AC cable is
connected.
AG-AC90A-SQT0323_mst.book 19 ページ 2014年5月15日 木曜日 午後2時6分