Filter
Top Products
(3) REC/Play Set up by Administrator
Power off time setting after shutting down the ignition
Initial camera setting, camera 1 or 2
Initial Audio 2 setting, INCAR or 2
nd
WMIC or LINK CAM
Start recording when VPU is turned on
Setting: Off Fixed
1 fps (frame per sec) recording
Recording mode: F-2Mbps (720x480, 30fps)
F-1Mbps (720x480, 10fps), Q-1Mbps (320x240, 30fps)
Q-512kbps (320x240, 30fps)
Recording will continue up to 1,2,5,10,15,20,30, 60, 90,
or Continue even if pressing STOP button
Set Pre Rec and Post Rec Time (0 to 90 seconds)
Set rule of file name, world time (WT) or local time (LT)
Enable or disable output of recording status as GPIO9
Select On Screen Display, “Simple”, “Details”, “Last”
or “Off”
Playback jumps to the trigger or bookmark position,
whichever found earlier
Move to the beginning of a file during playback
[Admin] Page 1/2
From Control Panel Top Menu
--”Setup info”—”Admin”
Select “Single” (normal playback, one file at a time) or
“Relay” (multiple files playback)
Enable or disable output of recording Error status as GPIO9
Select the initial audio output upon power on.
(Off, 1, 2, Both, Last)