Filter
Top Products
Chapter 7 Menu description tables
86
Mg (SAT/PHASE) –63
:
+00
:
+63
For performing the magenta color correction
(saturation and hue).
R (SAT/PHASE) –63
:
+00
:
+63
For performing the red color correction
(saturation and hue).
R-Mg (SAT/PHASE) –63
:
+00
:
+63
For performing the color correction (saturation
and hue) between red and magenta.
Mg-B (SAT/PHASE) –63
:
+00
:
+63
For performing the color correction (saturation
and hue) between magenta and blue.
7-3-3 COLOR CORRECTION
Item/
Data storage
Variable
range
Remarks
Cy (SAT/PHASE) –63
:
+00
:
+63
For performing the cyan color correction
(saturation and hue).
Cy-G (SAT/PHASE) –63
:
+00
:
+63
For performing the color correction (saturation
and hue) between cyan and green.
G (SAT/PHASE) –63
:
+00
:
+63
For performing the green color correction
(saturation and hue).
G-Yl (SAT/PHASE) –63
:
+00
:
+63
For performing the color correction (saturation
and hue) between green and yellow.
Yl (SAT/PHASE) –63
:
+00
:
+63
For performing the yellow color correction
(saturation and hue).
Yl-R (SAT/PHASE) –63
:
+00
:
+63
For performing the color correction (saturation
and hue) between yellow and red.
B-Cy (SAT/PHASE) –63
:
+00
:
+63
For performing the color correction (saturation
and hue) between blue and cyan.
B (SAT/PHASE) –63
:
+00
:
+63
For performing the blue color correction
(saturation and hue).
7-3-4 LOW SETTING
$ MATRIX TABLE
OFF
A
B
For selecting the color correction table.
$ COLOR
CORRECT
ON
OFF
For selecting ON or OFF for the color
correction.
Item/
Data storage
Variable
range
Remarks
$ MASTER GAIN
–3dB
:
0dB
:
30dB
For setting the master gain to –3, 0, 3, 6, 9,
12, 15, 18, 21, 24, 27 or 30 dB.
H.DTL LEVEL 00
:
17
:
63
For performing the H.DTL LEVEL setting.
V.DTL LEVEL 00
:
24
:
31
For performing the V.DTL LEVEL setting.
DTL CORING 00
:
02
:
15
For performing the DTL CORING setting.
H.DTL FREQ. 00
:
20
:
31
For performing the H.DTL FREQ setting.
LEVEL DEPEND. 0
1
:
5
For performing the LEVEL DEPEND setting.
MASTER GAMMA 0.35
:
0.45
:
0.75
For setting the MASTER GAMMA in 0.01
steps.
BLACK STRECH –3
:
OFF
:
+3
For setting the gamma curve of the dark
areas.
The underlining in the variable range column indicates the setting in the preset mode.The underlining in the variable range column indicates the setting in the preset mode.
SCUFE
SCUFE
SCUFE
SCUFE
SCUFE
SCUFE
SCUFE
SCUFE
SCUFE
SCUFE
SCUFE
SCUFE
$ COLOR
CORRECT
ON
OFF
For selecting ON or OFF for the color
correction.
SCUFE
SCUFE
SCUFE
SCUFE
SCUFE
SCUFE
SCUFE
SCUFE
SCUFE
SCUFE
SCUFE
<Note>
Items with $ in front of their names are set by the PAINT
MENU SW ($) R/W menu items on the <CARD R/W
SELECT> screen.
Items without $ in front of their names are set by the PAINT
MENU LEVEL R/W menu item.
For details, refer to “7-6-2 CARD R/W SELECT.”