Filter
Top Products
– 100 –
RET Button
The images recorded on the VTR or return video signal which has been input to the GENLOCK
IN connector can be seen on the viewfinder screen when the RET (return) button is pressed or
while it is kept pressed in.
What appears on the viewfinder screen differs as shown in the table below depending on the
RET SW setting for setting menu MAIN FUNCTION and the VTR status.
|Note{
When the REC SIGNAL item is set to VIDEO (when recording external input) at the MAIN
FUNCTION page of the setting menu, the external input appears on the viewfinder screen. How-
ever, the camera image appears on the viewfinder screen while the RET button is held down.
È Lens RET button functions
RET switch
Internal VTR mode
Description of what appears
setting on viewfinder screen
REC CHECK Recording Images shot by camera.
RET button does not function.
Recording paused What has been recorded
(2-second rec review) can be
checked.
Playing Internal VTR’s playback
images.
RET button does not function.
Playback paused Search operation for
successive shooting.
CAM RET Recording Return video signal which has
been supplied to GENLOCK
IN connector.
Recording paused Return video signal which has
been supplied to GENLOCK
IN connector.
Playing Return video signal which has
been supplied to GENLOCK
IN connector.
Playback paused Return video signal which has
been supplied to GENLOCK
IN connector.
MARKF Recording Switch functions as the
MARK switch for the Picture
Link function.
Recording paused Switch functions as the
MARK switch for the Picture
Link function.
Playing Picture played back by
internal VTR (RET button
does not function).
Playback paused Still picture played back by
internal VTR (RET button
does not function).
FThis is displayed when the Picture Link adaptor board (AJ-YAP900, optional
accessory) has been installed.