Panasonic AJ-HPX3000 Camcorder User Manual


 
9
HD-SDI, IEEE 1394, USB 2.0, RCU — For Interfacing with
IT (PC) -Based Broadcasting and Video Systems
Digital Backup Recording (HD/SDI/IEEE 1394)
The AJ-HPX3000 comes equipped with an HD-SDI output terminal that
can provide HD/SD baseband output. Use the AJ-HPX3000 in tandem
with the AJ-HPM100 P2 Mobile or a digital VTR (such as the AJ-HD1400),
and you can link rec start and stop operations for simultaneous backup
recording.
The AJ-HPX3000 also comes equipped with an IEEE 1394-compliant
DVCPRO output (6-pin) terminal. Use the AJ-HPX3000 in tandem with a
compatible recorder such as the AG-HPG10G P2 Gear, AJ-HPM100 P2
Mobile or FOCUS FS-100 "FireStore," and the AJ-HPX3000 can make
degradation-free backup recordings with a DVCPRO HD or DVCPRO 50
stream output.*
1
The AJ-HPX3000's two digital output systems HD-SDI and IEEE 1394
provide compatibility with a wide range of broadcasting and IT-based
equipment.
*1: IEEE 1394 backup recording is possible only with the DVCPRO HD/DVCPRO 50 codec.
HD/SD SDI Line Recording (Option)
When the AJ-YA350AG optional HD/SD SDI input board is installed,
HD/SD line recording is possible from SDI (serial digital) input.
*The input signal must be in the same format as the recording format of the camera-
recorder.
HD-SDI/SD-SDI Down-Conversion Output
The AJ-HPX3000 comes equipped with two BNC video line outputs for
flexible monitoring or line recording use.