Filter
Top Products
73
5
5-6 Attaching the Shoulder Strap
To detach the shoulder strap, first open the hooks, then detach
the strap.
<Note>
Make sure that the shoulder strap is securely attached.
5-7 Attaching the Rain Cover
When using the SHAN-RC700 Rain Cover
5-8 Connecting the AJ-EC3P
Extension Controller
Some functions can be remote-controlled when the AJ-EC3P
extension control unit (optional) is connected to the camera.
When the AJ-EC3P is connected, the camera automatically
enters remote control mode after the power switches of both the
camera and the AJ-EC3P are turned ON.
<Notes>
z Be sure to turn OFF both the camera and the AJ-EC3P power
switches before connecting or disconnecting the controller
cable.
z If ECU DATA SAVE is set to OFF, the camera-related setting
values, which have been adjusted or set using the AJ-EC3P,
will be cancelled when the camera power switch is turned
OFF. Also, the setting values cannot be written to an SD card.
However, the menu settings performed using the AJ-EC3P
can be written to an SD card. Next time the AJ-EC3P is
connected, the setting values will return to the AJ-EC3P
settings.
ECU DATA SAVE can be selected from the <SW MODE>
screen on the CAM OPERATION page.
z If ECU DATA SAVE is set to ON, the values adjusted or set
using the AJ-EC3P are retained, even after the camera power
switch is turned OFF.
z The USER switch on the camera does not function when the
AJ-EC3P is connected.
z When controlling the shutter from the AJ-EC3P, the shutter
speeds correspond to the speeds set by the menu on the
camera, not the speeds written on the AJ-EC3P. The shutter
speeds correspond as follows:
Press to open
the hook.
Shoulder Strap