Filter
Top Products
5
≥ Refer any servicing to qualified service
personnel.
≥ Handle the camera with care.
≥ Protect the precision made lens by plac-
ing the lens cap over when the camera is
not in use. If the lens is not installed, pro-
tect the surface of the prism by placing
the body cap into the lens mount hole.
≥ Use a mild blower or lens cleaning tissue
designed for coated lenses, to clean the
surface of the lens or prism in the event
that it should become dirty.
≥ Use a dry cloth to clean the camera if it is
dirty. In case the dirt is hard to remove,
use mild detergent and wipe gently.
≥ Use caution when operating the camera
in the vicinity of spot lights or bright lights,
as well as light reflecting objects and sur-
faces.
≥ Take immediate action if ever the camera
should become wet. Turn the power off
and have the unit checked by an autho-
rized service facility.
≥ Follow normal safety precaution to avoid
personal injury.
≥ Use the camera in an environment where
the temperature is within 32°F – +104°F
(0°C – +40°C), and the relative humidity
is within 30% – 90% (no condensation).
≥ Always turn the power off when the cam-
era is not going to be used. Operate the
camera only when there is adequate ven-
tilation.
≥ Cooling fan
There is internally provided a cooling fan.
Since the cooling fan is a consumable part,
replace it after about 50,000 hours of op-
eration.
(Be sure to ask the dealer for the replace-
ment.)
≥ Do not attempt to disassemble the cam-
era or other units. In order to prevent elec-
tric shock, do not remove screws or cov-
ers. There are no user-serviceable parts
inside.
≥ Do not abuse the camera. Avoid striking,
shaking, etc. The camera contains sensi-
tive components which could be damaged
by improper handling or storage.
≥ Do not let the lens remain uncapped when
the camera is not use. If the lens is not
installed, do not leave the lens mount hole
uncovered.
≥ Do not touch the surface of the lens or
prism.
≥ Do not use strong of abrasive detergents
when cleaning the camera body.
≥ Do not aim the camera toward the sun,
no matter whether it is turned on or not.
≥ Do not expose the camera to rain or mois-
ture, and do not try to operate the equip-
ment in wet conditions. Do not operate the
camera if it becomes wet.
≥ Do not operate the camera outdoors dur-
ing a lightning storm.
≥ Do not use the camera in an extreme en-
vironment where high temperatures or
high humidity exist.
≥ Do not leave the camera turned on when
not in use. Do not unnecessarily turn the
camera power on and off repeatedly. Do
not block the ventilation slots.
≥ Do not cover the port otherwise block ven-
tilation during operation. Internal heat
buildup can cause a fire.
Precautions
DON’TS DO’S