Filter
Top Products
Pan/Tilt Head Controller AW-RP400
34 (E)
ENGLISH
Specifications
Input connectors
DC 12V IN: XLR, 4 pins
CONTROL IN FROM ROP: D-SUB 15-pin, cable supplied with AW-CB400 remote operation panel
CONTROL IN FROM RCB: 10-pin round connector, cable supplied with WV-CB700A
EXT CONT IN: RJ45, additional AW-RP400 control signal input; 10BASE-T straight cable (UTP category 5),
max. 500 meters
REMOTE: 50-pin D-SUB connector, external control input, AW-CA50T9
Output connectors
CONTROL OUT TO
PAN/TILT HEAD: RJ45, pan/tilt head control signal output; 10BASE-T straight cable (UTP category 5),
max. 500 meters
MONI SEL OUT: RJ45, monitor switching signal output; 10BASE-T straight cable (UTP category 5),
max. 50 meters
EXT CONT OUT: RJ45, additional AW-RP400 control signal output; 10BASE-T straight cable (UTP category
5), max. 500 meters
Input/output connectors
INCOM (top panel): XLR, 4 pins
TALLY/INCOM: D-SUB, 15-pin
TALLY: Contact input (Do not apply a voltage in excess of 5V to this connector.)
INCOM: 4-wire system
Switch functions: Master/slave switching, OPERATE control, home position, menu/limit switch, optional
function operations, pan/tilt head selection, lens iris AUTO/MANU/LOCK switching, preset
memory data operations, tracing memory data operations, call
Adjustment functions: LCD contrast, INCOM level, lens iris, zoom, focus, pan/tilt/rotation, zoom speed,
focus speed, pan speed, tilt speed, rotation speed, menu settings
Ambient operating temperature: –10°C to +45°C
Storage temperature: –20°C to +60°C
Ambient operating humidity: 30% to 90% (no condensation)
Dimensions (W!H!D): 320!85!266 mm
Weight: Approx. ?? kg
Finish: Colour resembling Munsell 3.5
Supply voltage: DC 10.8V to 16V
Power consumption: Approx. 11W
1 indicates safety information.