Filter
Top Products
Operating Instructions
16
1.2.4 Setting Home Position/Sensor Position/Preset
Button
The home position, sensor position and 8 preset buttons can be registered. Preset
buttons (1—4) are registered 1: Upper Left, 2: Upper Right, 3: Lower Left and 4:
Lower Right. These buttons can be changed (see page 19).
• Registered buttons are shown in blue.
• Unregistered buttons are shown in white.
When clicking each button, the image switches to the home/sensor/preset position.
When restarted, the camera takes a home position. If the Lens Position When
Triggered setting is set (see page 59), the camera takes a sensor position after the
pyroelectric infrared sensor detects temperature differences.
Registering Home Position/Sensor Position
1.
Click [Program].
• [Program] switches to [Cancel].
Click [Cancel] to quit without saving
changes.
2. Pan and tilt the camera to a desired
position.
3. Click the home position button or the
sensor position button.
4. Click [Save].
• The bar switches to the operation
bar.
• Clicking [Back] takes you back to
the previous page.
Sensor
Position
Pan/Tilt
Program
Home
Position