Filter
Top Products
Operating Instructions
90
3.7 Using Setup Program
The Setup Program can be used for the following purposes.
• Finding the IP address and port number of the camera connected to your
network.
• Setting up the camera automatically.
• Setting up the camera manually to a Static or a DHCP setting.
• Displaying the Setup page.
Finding the camera
1.
Insert the Setup CD-ROM into the CD-ROM drive of your PC.
• If the Panasonic Network Camera Setup window does not appear, click
"setup.exe" on the Setup CD-ROM.
2. Click [Camera Setup].
• You can find the camera IP address and port number by looking up the
MAC address of your camera.
Notes
• If you try to find multiple cameras, each MAC address beside the Ethernet
(LAN) port verifies which camera you are setting up.
• See page 12 in the Installation/Troubleshooting for the setup from the
MAC address.
Displays version information about this
program.
Sets up the camera.
Displays the camera manuals.
If your PC does not have Adobe
®
Acrobat
®
Reader, install it from the Adobe Reader
website.
Closes the Setup Program.
Camera
Status
Camera
List window
Port
No.
MAC
Address
IP
Address