Filter
Top Products
Operating Instructions
100
3.7 Using Setup Program
The Setup Program can be used for the following purposes.
• Finding the IP address and port number of the camera connected to your
network.
• Setting up the camera automatically.
• Setting up the camera manually to a Static or a DHCP setting.
• Displaying the Setup page.
Finding the camera
1.
Connect the Ethernet cable to the camera following the Getting Started.
• If the Network Camera Setup window does not appear, click "setup.exe"
on the Setup CD-ROM.
2. Insert the Setup CD-ROM into the CD-ROM drive of your PC.
• If the Network Camera Setup window does not appear, click "setup.exe"
on the Setup CD-ROM.
3. Click [Camera Setup].
• You can find the camera IP address and port number by looking up the
MAC address of your camera.
Displays version information about this
program.
Sets up the camera.
Displays the camera manuals.
If your PC does not have Adobe
®
Acrobat
®
Reader, install it from the Adobe Reader
website.
Closes the Setup Program.
Camera
Status
Camera
List window
Port
No.
MAC
Address
IP
Address