Filter
Top Products
Operating Instructions
86
3.1.7 Resetting the Camera to Factory Default
All camera settings are reset to factory default directly after the Execute button is
clicked.
1. Click [Reset to Factory Default] on the Maintenance page.
2. Click [Execute].
• The indicator blinks orange, and then turns off for 10 seconds.
• All camera settings (user name, password, IP address, subnet mask etc.)
are reset to factory default.
• If the camera is reset to factory default, the network connection mode
changes to [Automatic Setup]. Reconfigure the camera seeing the Getting
Started.
Notes
• The internal clock will not be reset, but the time format will return to AM/
PM mode (see page 40). Set it again.
• See page 90—page 97 for default settings.
• Pressing the FACTORY DEFAULT RESET button resets the camera to the
factory default (see page 89).
• All buffered images are deleted when resetting the camera to factory
default.
• The reset operation takes about 1 minute.
• Do not turn off the camera during the reset operation.