Filter
Top Products
SHARPNESS H 30
F1:MARKER
F2:WFM
F3:PIXEL TO PIXEL
XXXXX
DC14.0V 50%
MENU
EXIT
SEL.
ENTER
ENTER
[MAIN MENU]
MARKER
VIDEO CONFIG
SYSTEM CONFIG
VF CONFIG
FUNCTION
GPI
INPUT SELECT
CONTROL
HOURMETER
13
Sharpness display
• SHARPNESS H/V is displayed when it is set.
• The display disappears if remains idle for 2 minutes.
Displays the operation explanation for the menu
button.
How to Use the On Screen Menu (continued)
Function display
• You can set FUNCTION display in the menu.
• When “FUNCTION DISPLAY” (→ page 23) is ON1
or ON2 and one of the buttons from [FUNCTION1] to
[FUNCTION3] is pressed, the unit displays the status
of the FUNCTION item that is set.
• The display disappears if remains idle for 2 seconds.
• The operational status is displayed in “XXXXX” (→ page
24 “Operation status displayed when a FUNCTION
button is used”).
DC power supply voltage and battery level display
• DC power supply voltage is displayed.
• Battery level is displayed when using an Anton/Bauer
type digital battery.
• Displayed when the operating status display is not
displayed.
Menu display
• This is displayed when the menu is used.
• The display disappears if remains idle for 2 minutes.