Filter
Top Products
Playback (advanced)
90
VQT0S57
[PLAY] mode menu (Refer to P78 for how to select the menu.)
[CLEAN UP] recovers the data writing
speed, which has been reduced, of the SD
memory card.
In general, the data writing speed of the SD
memory card reduces when recording and
deletion are repeated. In this case,
recording may stop in the middle while you
are recording motion pictures. We
recommend you to clean up the card using
the camera before recording motion
pictures.
1 Select [YES] to start the clean-up.
• [CLEAN UP] is a function to recover the
speed of writing into a free space in the
card. Therefore, pictures and data already
recorded in the card will not be erased.
• When you start clean-up, it may take time
to complete.
• Depending on the type of card,
[CLEAN UP] may not be effective.
• [CLEAN UP] does not support
MultiMediaCard.
• During clean-up do not turn the camera off.
• When you clean up the card, use a battery
with sufficient battery power (P14) or AC
adaptor (DMW-AC5; optional).
• When the SD Memory Card Write-Protect
switch is slid to [LOCK], you cannot clean
up the card.
Clean-up
[CLEAN UP]
CLEAN UP
CLEAN UP THE CARD?
SELECT
SET
YES
NO