Filter
Top Products
- 76 -
Recording
Applicable modes: (DMC-XS1)
(DMC-FH10)
Pictures are taken continuously while the shutter button is pressed.
[Burst]
Settings Description of settings
[˜]
([Burst On])
Burst speed approx. 1.0 pictures/second
•You can take pictures until the capacity of the built-in memory or the card is
full.
•The burst speed becomes slower halfway. The exact timing of this depends
on the type of card and the Picture Size.
•The focus, exposure and White Balance are fixed to the first picture.
•The Burst speed (pictures/second) may become slower depending on the
recording environment, such as in dark places, if the ISO sensitivity is high
etc.
[]
([Hi-Speed Burst])
Burst speed approx. 10 pictures/second
•This can be set only during Normal Picture Mode.
•The picture size is fixed to 3M (4:3), 2.5M (3:2), 2M (16:9) or 2.5M (1:1).
•The Burst speed changes according to the recording conditions.
•The number of Burst recording pictures are limited by the picture-taking
conditions and the type and/or status of the card used.
•The number of Burst recording pictures may increase when you use a card
with fast writing speed or card is formatted.
•The focus, zoom, exposure, White Balance, shutter speed and ISO sensitivity
are fixed to the settings for the first picture.
•The ISO sensitivity is automatically adjusted. However, the ISO sensitivity is
increased to make the shutter speed become high-speed.
[]
([Flash Burst])
Number of recordable
pictures
max. 5 pictures
•Still pictures are taken continuously with flash.
•This can be set only during Normal Picture Mode.
•The picture size is fixed to 3M (4:3), 2.5M (3:2), 2M (16:9) or 2.5M (1:1).
•Settings for focus, zoom, exposure, shutter speed, ISO sensitivity, flash output
are fixed to the first picture.
•The flash setting is fixed to [‰].
[OFF] —