Filter
Top Products
57
VQT1M59
Advanced (Recording pictures)
• The number of days that have passed since the departure date can be printed out using the
“PHOTOfunSTUDIO-viewer-” bundled software on the CD-ROM (supplied).
∫ Canceling the travel date
The travel date is automatically canceled if the current date is after the return date. If you
want to cancel the travel date before the end of the vacation, select [OFF] on the screen
shown in step
2 and then press [MENU/SET] twice.
Note
•
The travel date is calculated using the date in the clock setting and the departure date you set.
If you set [WORLD TIME] (P58) to the travel destination, the travel date is calculated using the
date in the clock setting and the travel destination setting.
• The travel date setting is memorized even if the camera is turned off.
• If you set a departure date and then take a picture on a date before this departure date, [-]
(minus) is displayed in orange and the day of the vacation that you took the picture is not
recorded.
• If you set a departure date and then change the clock setting to the date and time at the travel
destination, [-] (minus) is displayed in white and the day of the vacation that you took the picture
is recorded when the travel destination date is, for example, one day before the departure date.
• If [TRAVEL DATE] is set to [OFF], the number of days that have passed since the departure
date will not be recorded even if you set the travel date or the return date. Even if
[TRAVEL DATE] is set to [SET] after taking the pictures, which day of the vacation you took
them is not displayed.
Select [TRAVEL DATE] from the [SETUP] menu, and
then move 1.
Move 4 to select [SET] and then press [MENU/SET].
Move 3/4/2/1 to set the departure date (year/
month/day), and then press [MENU/SET].
Move 3/4/2/1 to set the return date (year/month/
day), and then press [MENU/SET].
• If you do not want to set the return date, press [MENU/SET] while
the date bar is displayed.
Press [MENU/SET] to close the menu.
Take a picture.
• The number of days that have passed since the departure date is displayed for about
5 seconds if this unit is turned on etc. after setting the travel date or when the travel date
is set.
• When the travel date is set, [—] appears on the lower right of the screen.
1
2
3
4
5
6
VQT1M59_ENG.book 57 ページ ２００８年１月８日 火曜日 午後５時２１分