Filter
Top Products
61
VQT1M59
Advanced (Recording pictures)
Note
•
Depending on the brightness and how fast the subject is moving, jitter may not be avoided.
• Movements may not be detected when a moving subject is small, when a moving subject is at
the edge of the screen or when a subject has moved at the very moment when the shutter
button was pressed fully.
• To avoid picture noise, we recommend decreasing maximum ISO sensitivity level or setting
[COLOR MODE] to [NATURAL]. (P65)
For details on [REC] mode menu settings, refer to P19.
This allows the sensitivity to light (ISO sensitivity) to be set. Setting to a higher figure
enables pictures to be taken even in dark places without the resulting pictures coming out
dark.
Applicable modes:
·
[AUTO]/[100]/[200]/[400]/[800]/[1600]
Note
•
When setting to [AUTO], the ISO sensitivity is automatically adjusted to a maximum of [ISO400]
according to the brightness. (It can be adjusted to a maximum of [ISO1000] when using the
flash.)
• The sensitivity automatically switches to between [ISO1600] and [ISO6400] in [HIGH SENS.] in
scene mode.
• The setting is not available when [INTELLIGENT ISO] is being used. ([ ] is displayed.)
• To avoid picture noise, we recommend that you either reduce the maximum ISO sensitivity level
or set [COLOR MODE] to [NATURAL], and then take pictures. (P65)
> [SENSITIVITY]
ISO sensitivity
100 1600
Recording location
(recommended)
When it is light (outdoors) When it is dark
Shutter speed Slow Fast
Noise Less Increased
VQT1M59_ENG.book 61 ページ ２００８年１月８日 火曜日 午後５時２１分