Panasonic DMC-FS25 Digital Camera User Manual


 
33
VQT1W65
Basic
Extended optical zoom mechanism
When you set the picture size to [ ] (3 million pixels), the 12M (12.1 million pixels) CCD
area is cropped to the center 3M (3 million pixels) area, allowing a picture with a higher
zoom effect.
Note
•The digital zoom cannot be set when õ has been selected.
•The indicated zoom magnification is an approximation.
•“EZ” is an abbreviation of “Extended optical Zoom”.
•The optical zoom is set to Wide (1k) when the camera is turned on.
•If you use the zoom function after focusing on the subject, focus on the subject again.
•The lens barrel extends or retracts according to the zoom position. Take care not to interrupt
the motion of the lens barrel while the zoom lever is rotated.
•When using the digital zoom, [STABILIZER] may not be effective.
•When using the digital zoom, we recommend using a tripod and the self-timer (P42) for taking
pictures.
•The extended optical zoom cannot be used in the following cases.
– In Macro zoom mode
– In [TRANSFORM], [HIGH SENS.], [HI-SPEED BURST], [FLASH BURST], [PIN HOLE],
[FILM GRAIN] or [PHOTO FRAME] in Scene mode
– In Motion picture mode
•[DIGITAL ZOOM] cannot be used in the following cases.
– In [TRANSFORM], [SPORTS], [BABY1]/[BABY2], [PET], [HIGH SENS.],
[HI-SPEED BURST], [FLASH BURST], [PIN HOLE], [FILM GRAIN] or [PHOTO FRAME] in
Scene mode
– When [INTELLIGENT ISO] is set
[PLAYBACK] mode: ¸
Playing back Pictures ([NORMAL PLAY])
Slide the [REC]/[PLAYBACK] selector
switch A
to [(].
Normal playback is set automatically in the
following cases.
–When the mode was switched from the [REC] to
[PLAYBACK]
–When the camera was turned on while the [REC]/
[PLAYBACK] selector switch was at [(].
Move 2/1 to select the picture.
2: Play back the previous picture
1: Play back the next picture
DMC-FS25PPC-VQT1W65_eng.book 33 ページ 2009年1月22日 木曜日 午前11時6分