55
VQT1W65
Advanced (Recording pictures)
[REC] mode: n
Advanced (Recording pictures)
Motion Picture Mode
•When you set the recording quality to [ ] or [ ], we recommend using a high-speed card
with “10MB/s” or greater displayed on the package.
Press [MENU/SET].
Move
3
/
4
to select [REC QUALITY] and then move
1
.
Move 3/4 to select the item and then press
[MENU/SET].
¢Cannot be recorded in the built-in memory.
Slide the [REC]/[PLAYBACK] selector switch to [!], and then press
[MODE].
Move
3
/
4
to select [MOTION PICTURE], and then press [MENU/SET].
Press the shutter button halfway to focus
and then press it fully to start recording.
A Audio recording
• The available recording time B is displayed on the top
right and the elapsed recording time C is displayed on
the bottom right of the screen.
• After pressing the shutter button fully, release it straight
away. If the button is held down, the sound will not be
recorded for a few seconds when recording starts.
•
When the subject is focused, the focus indication lights.
• The focus and zoom are fixed to the setting when
recording starts (the first frame).
• The audio is also recorded simultaneously from the
built-in microphone on this unit. (Motion pictures
cannot be recorded without audio.)
Press the shutter button fully to stop recording.
• If the built-in memory or the card becomes full in the middle of recording, the camera
stops recording automatically.
Changing the settings for the recording quality
Item Picture size fps Aspect ratio
¢
848k480 pixels 30 16:9
¢
640k480 pixels 30
4:3
320k240 pixels 30
C
A B
DMC-FS25PPC-VQT1W65_eng.book 55 ページ 2009年1月22日 木曜日 午前11時6分