Filter
Top Products
101
VQT1V73
Others
•Are you trying to play back the motion pictures by directly inserting the card in the card slot of
the TV?
> Connect the camera to the TV with the AV cable (supplied) and then play back the pictures
on the camera. (P88)
> Check [TVASPECT] setting. (P25)
•Is the camera connected to the PC correctly?
•Is the camera recognized by the PC correctly?
> Set to [PC] in [USB MODE]. (P25, 81)
> Disconnect the USB connection cable. Connect it again while the card is inserted in the
camera.
•Pictures cannot be printed using a printer which does not support PictBridge.
> Set to [PictBridge(PTP)] in [USB MODE]. (P25, 84)
> When using a printer with a trimming or borderless printing function, cancel this function
before printing. (For details, refer to the operating instructions for the printer.)
> When you order photo studios to print pictures, ask the photo studio if the pictures can be
printed with both ends.
> Press [MENU/SET], select the [SETUP] menu icon [ ] and then select the [~] icon to set
the desired language. (P26)
•In dark places, the AF assist lamp (P66) lights red to make it easier to focus on a subject.
•Is [AFASSIST LAMP] on the [REC] mode menu set to [ON]? (P66)
•The AF assist lamp does not turn on in bright places.
•The surface of the camera may become warm during use. This does not affect the performance
or quality of the camera.
The motion pictures cannot be played back on a TV.
The picture is not displayed fully on the TV.
The picture cannot be transferred when the camera is connected to a PC.
The card is not recognized by the PC. (The built-in memory is recognized.)
The picture cannot be printed when the camera is connected to a printer.
The ends of the pictures are cut at printing.
Others
An unreadable language was selected by mistake.
A red lamp sometimes turns on when the shutter button is pressed halfway.
The AF assist lamp does not turn on.
The camera becomes warm.
DMC-FS7&FS6PPC-VQT1V73_eng.book 101 ページ ２００８年１２月１日 月曜日 午後５時１０分