Panasonic DMC-FS8S Digital Camera User Manual


 
VQT1V73
18
Preparation
Setting Date/Time (Clock Set)
•The clock is not set when the camera is shipped.
Turn the camera on.
The [PLEASE SET THE CLOCK] message appears.
(This message does not appear in [PLAYBACK]
mode.)
A [MENU/SET] button
B Cursor buttons
Press [MENU/SET].
A: Time at the home area
B: Time at the travel destination (P58)
: Cancel without setting the clock.
Select either [24HRS] or [AM/PM] for the time display
format.
AM/PM is displayed when [AM/PM] is selected.
When [AM/PM] is selected as the time display format, midnight is displayed as AM
12:00 and noon is displayed as PM 12:00. This display format is common in North
America and elsewhere.
Press [MENU/SET] to set.
After completing the clock settings, turn the camera off. Then turn the camera back on,
switch to Recording mode, and check that the display reflects the settings that were
performed.
When [MENU/SET] has been pressed to complete the settings without the clock having
been set, set the clock correctly by following the “Changing the clock setting” procedure
below.
Select [CLOCK SET] in the [REC] or [SETUP] menu, and press 1. (P20)
•It can be changed in steps 3 and 4 to set the clock.
•The clock setting is maintained for 3 months using the built-in clock battery even
without the battery. (Leave the charged battery in the unit for 24 hours to charge the
built-in battery.)
Press 2/1 to select the items (year,
month, day, hour, minute, display
sequence or time display format), and
press 3/4 to set.
Changing the clock setting
ON
OFF
/SET
MENU
:
:
DMC-FS7&FS6PPC-VQT1V73_eng.book 18 ページ 2008年12月1日 月曜日 午後5時10分