Panasonic DMC-FX38 Digital Camera User Manual


 
31
VQT1S07
Basic
Extra optical zoom mechanism
When you set the picture size to [ ] (3 million pixels), the 10M (10.1 million pixels) CCD
area is cropped to the centre 3M (3 million pixels) area, allowing a picture with a higher
zoom effect.
Note
The digital zoom cannot be set when õ or ¨ has been selected.
The indicated zoom magnification is an approximation.
“EZ” is an abbreviation of “Extra optical Zoom”.
The optical zoom is set to Wide (1k) when the camera is turned on.
If you use the zoom function after focusing on the subject, focus on the subject again.
The lens barrel extends or retracts according to the zoom position. Take care not to interrupt
the motion of the lens barrel while the zoom lever is rotated.
When using the digital zoom, [STABILIZER] may not be effective.
When using the digital zoom, we recommend using a tripod and the self-timer (P41) for taking
pictures.
[PLAYBACK] mode: ¸
Playing back Pictures ([NORMAL PLAY])
Speed of picture forwarding/rewinding changes depending on the playback status.
Fast forwarding/Fast rewinding
Press and hold 2/1 during playback.
The file number A and the picture number B only
change one by one. Release 2/1 when the number of
the desired picture appears to play back the picture.
If you keep pressing 2/1, the number of pictures forwarded/rewound increases.
Slide the [REC]/[PLAYBACK] selector
switch A
to [(].
Normal playback is set automatically in the
following cases.
When the mode was switched from the [REC]
to [PLAYBACK].
When the camera was turned on while the
[REC]/[PLAYBACK] selector switch was at
[(].
When the mode dial is set to [¨], clipboard will
be displayed. Refer to
Viewing clipboard
pictures
(P69) for information about playing
back the clipboard.
Press 2/1 to select the picture.
2: Play back the previous picture
1: Play back the next picture
2:Fast rewind
1: Fast forward
1
2
A
B
DMC-FX38GN-VQT1S07_eng.book 31 ページ 2008年7月7日 月曜日 午後8時42分