Filter
Top Products
Others
109
VQT0Y19
3: The folder number and the file number
are displayed as [—] and the screen
turns black.
• Is the picture edited with a PC or
recorded with a digital camera from
another manufacturer?
This may also happen if the battery is
removed immediately after recording or
if recording with a exhausted battery.
– Format the data to delete the pictures
mentioned above. (P91) (Formatting
irretrievably deletes all data including
the other pictures. Check the data
carefully before formatting.)
4: The picture is displayed with a date
different from the actual recording
date in calendar playback.
• Was the picture edited with a PC or
recorded with a digital camera from
another manufacturer?
This kind of picture may be displayed
with a date different from the actual
recording date in calendar playback.
(P65)
• Is the clock in the camera set properly?
(P19)
For example, if the clock setting on the
camera is different from the date and
time set on the PC and you acquire
pictures recorded with the camera to
the PC and then write them back to the
card, the pictures may be displayed with
dates different from the actual recording
dates in calendar playback etc.
w TV, PC and printer
1: The picture does not appear on the
television.
• Is the camera connected to the TV
correctly?
• Set the TV input to external input mode.
2: The display areas on the TV screen
and the camera’s LCD monitor are
different.
Depending on the TV model, the area
display may be smaller so the picture
may be stretched horizontally or vertically
and the top and bottom or left and right of
the picture may be cut off when it is
displayed. This is due to the TV
specifications and is not a malfunction.
3: The motion pictures cannot be played
back on a TV.
• Are you trying to play back the motion
pictures by directly inserting the card in
the card slot of the TV?
– Connect the camera to the TV with the
AV cable (supplied) and then play back
the pictures on the camera. (P99)
4: The picture cannot be transferred
when the camera is connected to a
PC.
• Is the camera connected to the PC
correctly?
• Is the camera recognized by the PC
correctly?