Filter
Top Products
Others
110
VQT0Y19
5: The card is not recognized by the PC.
• Disconnect the USB connection cable.
Connect it again while the card is
inserted in the camera.
6: The picture cannot be printed when
the camera is connected to a printer.
• Does the printer support PictBridge?
– You cannot print pictures with printers
which do not support PictBridge. (P95)
• Reset the mode to [ ]. (P95)
7: The ends of the pictures are cut at
printing.
• When using a printer with a trimming or
borderless printing function, cancel this
function before printing. (For details,
refer to the operating instructions for the
printer.)
• When you order photo studios to print
pictures, ask the photo studio if the
pictures can be printed with both ends.
8: The picture is not displayed fully on
the TV.
• Set the aspect of the TV on the camera.
(P22)
w Others
1: An unreadable language was selected
by mistake.
• Press [MENU/SET], select the [SETUP]
menu icon [ ] and then select the [ ]
icon to set the desired language. (P22)
2: The setting for the auto review
function is disabled.
• Are you taking pictures using auto
bracket (P45)? Is the camera in burst
mode (P47) or motion picture mode [ ]
(P62) or [SELF PORTRAIT] (P52) ?
Is [AUDIO REC.] set to [ON] (P76)?
– In these cases, you cannot set the auto
review function in the [SETUP] menu.
3: A red lamp sometimes turns on when
the shutter button is pressed halfway.
• In dark places, the AF assist lamp (P78)
lights red to make it easier to focus on a
subject.
4: The AF assist lamp does not turn on.
• Is [AF ASSIST LAMP] on the [REC]
mode menu set to [ON]? (P78)
• Are you taking pictures in dark places?
– The AF assist lamp does not turn on
in bright places.
• The AF assist lamp does not turn on
when [SCENERY] (P50),
[NIGHT SCENERY] (P51) [SELF
PORTRAIT] (P52), [FIREWORKS]
(P53) or [AERIAL PHOTO] (P55) in
scene mode is selected.