Filter
Top Products
Recording pictures (basic)
44
VQT0S74
Taking Pictures using Burst Mode
1 Press the single or burst mode
button to switch the burst mode
setting and then take pictures.
: High speed
;
: Low speed
;
:Unlimited
¢
1
;
No display: cancelled
¢1 Depending on the memory size,
battery power, picture size and
quality (compression)
• Hold down the shutter button fully to
activate the burst mode.
∫ Number of pictures recorded in burst
mode
¢2 The burst speed is constant regardless
of the transfer speed of the card.
• When the shutter speed is faster than
1/60 and the flash is not activated.
• When the burst mode setting is set to
Unlimited
– You can take pictures until the capacity
of the card becomes full.
– The burst speed becomes slower
halfway. Depending on the picture size
or card, the time the speed becomes
slower differs.
• The focus is fixed at taking the first
picture.
• In simple mode [ ], the burst speed is
fixed to Low.
• When the self-timer is used, the number
of recordable pictures in burst mode is
fixed to 3.
• When the burst mode is activated, [AUDIO
REC.] cannot be used.
• When the flash is activated or [STARRY
SKY] (P62) in scene mode is selected,
you can take only 1 picture.
• When setting auto bracket and the burst
mode simultaneously, auto bracket will be
performed.
3
Burst speed
(pictures/
second)
Number of recordable
pictures (pictures)
3
¢
2
max. 6 max. 8
2
¢
2
max. 6 max. 8
approx. 1.5
Depends on remaining
capacity of the card