- 175 -
Others
3 Select [CONVERSION] on the [REC] Mode menu. (P48)
•
Refer to P127 for [CONVERSION].
4 Press 3/4 to select [ ], and then press [MENU/SET] to set.
•
Set in same way to select [ ] too.
• Always set to [OFF] when the conversion lens is taken off.
Note
•
Lens adapter (DMW-LA5; optional) is needed to use the conversion lens.
• MC protector (DMW-LMC52; optional) or ND filters (DMW-LND52; optional) cannot be used
together with the conversion lens. Remove them before attaching the conversion lens.
• Do not use with anything other than DMW-LC55 or DMW-LT55.
• When there is dirt (water, oil, and fingerprints, etc.) on the surface of the lens, the image may
be affected. Lightly wipe the surface of the lens with a soft, dry cloth before and after taking
pictures.
• When using the tele conversion lens:
– We recommend using a tripod.
– The Stabilizer function may not work sufficiently.
– The focus indication may light due to the jitter even if the subject is not focused.
– The time required for focusing may become longer than usual.
The MC protector (DMW-LMC52; optional) is a transparent filter which affects neither the
colours nor the amount of light, so it can always be used to protect the camera’s lens.
The ND filter (DMW-LND52; optional) reduces the amount of light to approximately 1/8th
(equal to adjusting the aperture value 3 increments) without affecting the colour balance.
PL filter (DMW-LPL52; optional) will suppress the reflected light from a metal or non
spherical surfaces (flat non-metallic surfaces, water vapour or invisible particles in the air),
making it possible to take a picture with enhanced contrast.
Note
•
Do not attach multiple filters at the same time.
• If the filter is tightened too much, you may not be able to remove it. Do not tighten it too much.
• You cannot attach the filter when the lens hood is attached.
• If the filter is dropped, it may be destroyed. Be careful not to drop it when attaching it to the
camera.
• Be careful not to get a fingerprint, dirt, etc., on the filter when it is attached, otherwise the focus
may be adjusted to the lens, resulting in the subject being out of focus.
• Refer to the instructions for each filter for details.
Protector/Filter (optional)
C