Filter
Top Products
Before Use
- 10 -
Note
•
Be careful as this unit may get scratched if you rotate the LCD monitor without opening
the LCD monitor fully.
• Check that the terminal door is closed when rotating the LCD monitor. The terminal door
may get damaged or LCD monitor may get scratched if you rotate the LCD monitor with
the terminal door opened.
• When not using the LCD monitor it is recommended that you close it with the screen facing
inwards to prevent dirt and scratches.
• Note that operating noise may be recorded when recording a motion picture with the LCD
monitor rotated.
∫ Switching the LCD monitor/Viewfinder
Press [EVF/LCD].
•
You can switch between LCD monitor display and Viewfinder
display.
• Switching via the [EVF/LCD] button will be maintained even
when the power of the digital camera is turned [OFF].
∫ Diopter adjustment
Adjust the diopter to suit your vision so that you can see the
Viewfinder clearly.
Look at the display on the Viewfinder and rotate the
diopter adjustment dial to where the screen is clearest.
A Diopter adjustment dial
Viewfinder