- 141 -
Playback/Editing
It is possible to setup the images to be uploaded to the image sharing sites (Facebook/
YouTube) on this unit.
•
You can only upload motion pictures to YouTube, while you may upload both motion pictures
and still pictures to Facebook.
• This cannot be done to the images in the built-in memory. Copy the images to a card
(P155), and then perform the [UPLOAD SET].
Select [UPLOAD SET] on the [PLAYBACK] Mode menu. (P48)
Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/
SET].
∫ Upload to the image sharing sites
An upload tool built-in to the camera “LUMIX Image Uploader” is automatically copied to
the card when you setup [UPLOAD SET].
Perform the upload operation after connecting the camera to a PC (P165). For details,
refer to P168.
∫ Canceling all the [UPLOAD SET] settings
1 Select [UPLOAD SET] on the [PLAYBACK] Mode menu.
2 Press 3/4 to select [CANCEL] and then press [MENU/SET].
•
Confirmation screen is displayed. It is executed when [YES] is selected.
Exit the menu after it is executed.
Note
•
The pictures that were taken with the [QUALITY] set to [ ] cannot be set to [UPLOAD SET].
• Setting may not be possible for pictures recorded with other cameras.
• It cannot be set with a card with less than 512 MB of memory.
[UPLOAD SET]
Select the picture, and then
press [MENU/SET] to set.
[MULTI] setting
Press [DISPLAY] to set (repeat), and
then press [MENU/SET] to set.
•
The setting is canceled when
[DISPLAY] is pressed again.
• Confirmation screen is displayed. It is
executed when [YES] is selected.
Exit the menu after it is executed.
[SINGLE] [MULTI]
Press 2/1 to select
the picture.
Press 3/4/2/1 to
select the pictures.