Filter
Top Products
Preparation
14
Using the AC Adaptor
If you use an AC adaptor and connect it to an
electrical outlet, you can use the camera
without worrying about battery discharge.
[Preparation]
• Check that the power switch is set to [OFF]
and the lens is stored.
1 Connect the AC cable.
2 Open the DC IN terminal door.
3 Connect the DC cable (supplied) to
the camera.
• The camera becomes warm during use.
However, it is not malfunction.
• Disconnect the AC adaptor and DC cable
when you do not use.
• The battery cannot be charged in the
camera with the AC adaptor connected.
• Use the supplied DC cable.
1
2
3
FZ2-A.book 14 ページ ２００３年８月６日 水曜日 午前１０時０分