Filter
Top Products
23
VQT1U50
Preparation
Inserting/Removing the Card (Optional)
• Check that this unit is turned off.
• Close the flash.
• We recommend using a Panasonic card.
Slide the card door to open it.
Push it fully until it clicks being careful
about the direction you insert it. To remove
the card, push the card until it clicks, then
pull the card out upright.
A:Do not touch the connection terminals of the card.
•
The card may be damaged if it is not fully inserted.
1:Close the card door.
2:Slide the card door to the end and then
close it firmly.
• If the card door cannot be completely closed, remove
the card and insert it again.
Note
•
Always turn the camera off before opening the card door.
• Before removing the card, turn the camera off, and wait until the status indicator has gone off
completely. (Otherwise, this unit may no longer operate normally and the card itself may be
damaged or the recorded pictures may be lost.)