Filter
Top Products
- 143 -
Recording
• Imaging device and image processing is optimized when the camera is purchased. Use this
function when bright spots that do not exist in the subject get recorded.
• Turn the camera off and on after the pixels are corrected.
• Dust reduction function will operate automatically when the camera is turned on, but you can
use this function when you see dust. (P189)
• When using a Leica lens mount adaptor (DMW-MA2M, DMW-MA3R; optional), set it to [ON].
[MENU RESUME]
The last operated menu position is saved even if the camera is
turned off.
[OFF]/[ON]
[PIXEL REFRESH]
It will perform optimization of imaging device and image
processing.
[SENSOR CLEANING]
Dust reduction to blow off the debris and dust that have affixed to
the front of the imaging device is performed.
[SHOOT W/O LENS]
It is possible to setup so the shutter will not operate when there is
no lens on the unit.
[OFF]: You cannot press the shutter button when a lens is not
attached to the camera body or is not attached
correctly.
[ON]: Shutter will operate regardless of the lens on the unit.