Filter
Top Products
77
Wi-Fi/NFC
(ENG) VQT5H68
1 Press and hold [Wi-Fi] on the camera.
2 Start “Image App” on your smartphone/tablet.
3 Select [QR code], and then select [OK].
4 Using “Image App”, scan the QR code
displayed on the screen of the camera.
A QR code
• If you press [MENU/SET] on the camera, the QR code will
be enlarged. When it is difficult to scan the QR code, try
enlarging it.
5 Install the profile of “IMAGE APP”.
•
A message will be displayed on the browser.
• If the smartphone/tablet is locked with a passcode, enter
the passcode to unlock the smartphone/tablet.
6 Press the home button to close the browser.
7 Turn on the Wi-Fi function in the setting menu of the smartphone/tablet.
8 Select the SSID displayed on the screen of the camera.
9 Return to the home screen, and then start “Image App”.
•
Steps 2 through 6 are not required from the second time on.
If you are using an iOS device [iPhone/iPod touch/iPad]
Using the QR code to set up a connection
ョㄏヒ
ヸㄊノョㄊ
A
IMAGE APP
Panasonic Corporation
Wi-Fi
DMC-GH4_PPC-VQT5H68_eng.book 77 ページ ２０１４年３月１２日 水曜日 午後１０時３５分